Water Connection; Drain Hose Connection; Drain Pipe - Fagor LVF11A Manual De Instrucciones

Water Connection

Water Connection
Cold Water Connection
WARNING! WARNING! Please close the hydrant after using.

Drain hose Connection

Insert the drain hose into a drain pipe with a minimum diameter of 40mm, or let it run into the sink, making sure to
avoid bending or crimping it. The top of the hose must be less than 1000mm.
Front
NOTE
The top of the hose
must be less than
1000mm.
All manuals and user guides at all-guides.com
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure
that it is fastened tightly in place.
If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear. This precaution is needed to avoid the
risk of the water inlet to be blocked and damage the appliance.
PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B PLEASE HANG UP THE DRAIN HOSE EITHER WAY OF A, B
A

Drain pipe

17 17
B
40mm
Counter