Ingersoll Rand TS1A-13A Manual De Manejo Y Mantenimiento página 19

TS–2A, TS–3A & TS–4A, 50/60Hz
KEY
A. Electrical conduit connection
B. Compressed air inlet
50Hz – 2" BSPT female
230v / 1 / 60Hz – 2" BSPT female
380v / 3 / 60Hz – 2" BSPT female
All other 60Hz – 2" NPT female
Model
TS–2A
TS–3A
TS–4A
NOTES:
1. Weight (approximate):
TS–2A: 226 kg (497 lb)
TS–3A: 230 kg (506 lb)
TS–4A: 230 kg (506 lb)
2. Refrigerant: R–404A
Tolerance on dimensions: 13mm (0.5") unless otherwise
3.
stated.
All manuals and user guides at all-guides.com
8.0 GENERAL INFORMATION
Dimension "X"
1408 mm
1396 mm
1410 mm
TS1A–13A
http://air.irco.com
C. Compressed air discharge
50Hz – 2" BSPT female
230v / 1 / 60Hz – 2" BSPT female
380v / 3 / 60Hz – 2" BSPT female
All other 60Hz – 2" NPT female
D. Condensate drain
50Hz – 1/8" BSPT female
230v / 1 / 60Hz – 1/8" BSPT female
380v / 3 / 60Hz – 1/8" BSPT female
All other 60Hz – 1/8–27 NPTF female
4. 305mm (12") minimum electrical cable length allowance is
required between the electrical cable entry (A) and the mains
terminal block.
5. Recommended clearance on all sides 1 m (3 ft) front panel with
starter door may require more as defined by local and national
electrical codes.
6. External piping shall not exert any unresolved moments or
forces on it.
7. There should be no plastic piping, not approved by IR, attached
to this unit or used for any lines downstream.
8. Field installed ducting to and from the dryer can not add more
than 1.0mm (0.04) water air resistance.
17