Troy-Bilt 030247 Manual Del Operario página 2

Safety Rules
SAVE THESE iNSTRUCTiONS
TABLE OF CONTENTS
Safety Rules .................................... 2-4
Know Your Generator ............................. 5
Assembly ...................................... 6-8
Operation .................................... 9-14
Specifications ................................... 5
Maintenance .................................... 5
Storage ........................................ 6
Troubleshooting ................................. 7
Notes ......................................... 8
Warranty ...................................... 9
EQUIPMENT
DESCRiPTiON
Read this manual carefully and become
familiar with your generator. Know its
applications, its limitations and any hazards
involved.
The generator is an engine-driven, revolving field,
alternating current (AC) generaton It was designed to
supply electrical power for operating compatible electrical
lighting, appliances, tools and motor loads.The generator's
revolving field is driven at about 3,600 rpm by a single-
cylinder engine.
CAUTION!
DO NOT exceed the generator's
wattage/amperage capacity. See "Don't Overload
Generator".
Every effort has been made to ensure that information in
this manual is accurate and current. However, we reserve
the right to change, alter or otherwise improve the product
and this document at any time without prior notice.
The Emission Control System for this generator is
warranted for standards set by the Environmental
Protection Agency and the California Air Resources Board.
For warranty information refer to the engine operator's
manual.
SAFETY RULES
_t his is the safety alert symbol. It is used to
alert you to potential personal injury hazards.
Obey all safety messages that follow this
symbol to avoid possible injury or death.
The safety alert symbol (_) is used with a signal word
(DANGER, CAUTION,WARNING), a pictorial and/or a
safety message to alert you to hazards. DANGER indicates
a hazard which, if not avoided, will result in death or serious
injury. WARNING indicates a hazard which, if not avoided,
could result in death or serious injury. CAUTION
indicates a hazard which, if not avoided, might result in
minor or moderate injury. CAUTION, when used
without the alert symbol, indicates a situation that could
result in equipment damage. Follow safety messages to
avoid or reduce the risk of injury or death.
[
wA..i.G
The engine exhaust from this product contains
chemicals known
to the State of California
to cause
[cancer, b rth defects, or other reproduct ve harm.
Hazard Symbols and Meanings
Operator's Planual
Explosion
Toxic Fumes
Fire
Kicl<back
Electrical Shock
Flying Objects
Hot Surface
Copyright © 2006 Brigs & Stratton Power Products
Group, LLC. All rights reserved. No part of this material
may be reproduced or transmitted in any form by any
means without the express written permission of Brigs &
Stratton Power Products Group, LLC.
O