Instructions For Installation Equipment - Cameo ZENIT W600i Manual Del Usuario

4. A permanently installed lamp is installed in this lighting unit which must not be
replaced by the user. In the event of a fault, please contact your sales partner.

INSTRUCTIONS FOR INSTALLATION EQUIPMENT

1. Equipment for installation applications is designed for continuous operation.
2. Equipment for outdoor installation is largely weather-resistant. Depending on the design,
however, installed seals may be made of materials that deteriorate over time. These must be
checked regularly and replaced if necessary.
3. The correct condition of the housing parts and connections must be checked regularly.
4. Surfaces and plastic parts can also weather in installation equipment, e.g. due to UV irradia-
tion. This generally does not impair functionality.
5. Damage to the surface coating can impair the device's corrosion protection. Damaged sur-
face coating (e.g. scratches) must be promptly repaired by suitable measures.
6. Screw connections can be impaired in their freedom of movement (e.g. due to oxidation or
impurities). Here, appropriate measures for loosening are to be implemented.
7. Unless explicitly stated otherwise on the device or in the technical data, the devices are
intended for installation heights of less than 5 m.
NOTES FOR INSTALLATION DEVICES
1. units for installation applications are designed for continuous operation.
2. units for outdoor installation are largely weatherproof. However, depending on the design,
seals made of ageing materials are installed. These must be checked regularly and replaced if
necessary.
3. The correct condition of the housing parts and connections must be checked regularly.
4. Surfaces and plastic parts of installation units can also weather, e.g. due to UV radiation. This
does not usually lead to functional restrictions.
5. Damage to the surface coating can impair the corrosion protection of the unit. A damaged
surface coating (e.g. scratches) must be restored promptly by suitable measures.
6. The freedom of movement of screw connections can be impaired (e.g. by oxidation or contami-
nation). If necessary, appropriate measures must be taken to loosen them.
7. Unless explicitly stated otherwise on the unit or in the technical data, the units are intended for
installation heights of less than 5 m.
10