Set-Up And Installation - Cameo CLDROPP4 Manual De Usuario

SET-UP AND INSTALLATION

Thanks to the wide stand and mounting bracket, the spotlight can be positioned in a suitable location on a level surface. Installation on a
truss is possible with a suitable truss clamp, which is attached to the mounting bracket
Ensure firm connections and secure the spotlight by attaching a suitable safety cable to the securing lug on the mounting bracket. When
installing on a truss, make sure that the mounting bracket is securely attached to the spotlight housing using the four fixing screws
Important safety notice: Overhead mounting, especially above persons, requires extensive experience, including the
calculation of the load limit values of the installation material and regular safety inspection of all installation materials and
spotlights. If you do not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a
qualified professional.
In order effectively use the tilt screw for uplight applications and for a more discreet appearance, the mounting bracket must be removed by
loosening the four fixing screws
16
B
holding the mounting bracket to the spotlight housing with a suitable tool.
B
. Suitable truss clamps are optionally available.
A
B
A
.
B