Creating Realistic Sound (3D Phonic); Adjusting Playback Level (Dvd Level); Enjoying Better Pictures (Scan Mode) - JVC CA-FSY1 Manual De Instrucciones

Other convenient functions (continued)
Creating realistic sound
(3D PHONIC)
The two speakers produce an effect resembling
surround-sound.
1
Press 3D PHONIC during
playback.
Ex.:
3D PHONIC
• Each time you press the button, the 3D
PHONIC will be alternated as follows:
ACTION
DRAMA
THEATER : You can enjoy the sound effect
OFF
• While 3D PHONIC is activated, "3D
PHONIC" appears and the 3D PHONIC
indicator lights on the display window.
NOTE
• 3D PHONIC is effective for the speakers and
headphones.
• When noise is produced or sound is distorted, set
3D PHONIC to "OFF".
• You cannot operate some DVD AUDIO discs.
26
TV screen
: Suitable for action movies,
sport programs or other lively
programs.
: You can relax with a natural
atmosphere.
as if you were watching the
movie in a theater.
: Cancels 3D PHONIC (initial
setting).
Adjusting playback level
(DVD LEVEL)
The audio of a DVD VIDEO may be recorded at a
lower level (volume) than for other types of disc. If
the difference is not to your liking, adjust the DVD
Level.
1
Press DVD LEVEL during
playback.
• Each time you press the button, the level
will be alternated among "NORMAL",
"MIDDLE" and "HIGH".
• Select the level while listening to the sound
played.
NOTE
• DVD Level is effective only for playback of a DVD
VIDEO.
• Even if the DVD Level is changed, the output level
from the digital audio output terminal will not be
changed.
Enjoying better pictures
(SCAN MODE)
In the Progressive mode, better pictures can be
enjoyed.
CAUTION
• In order to enjoy pictures in the Progressive
mode, the following requirements should be met:
• There must be a component video input terminal
on the TV set connected to the main unit.
• The main unit and the TV set must be
connected using a component video cord
(page 11).
When the above requirements are not satisfied,
leave the main unit in the Interlace mode. If the
Progressive mode is set, pictures may be distorted.
Press and hold SCAN MODE for 4
seconds when there is no disc loaded
or while the disc is stopped.
• Each time you press and hold the button, the
scan mode alternates between the
"PROGRESSIVE" mode and the "INTERLACE"
mode.
NOTE
Progressive mode:
All scanned lines will be displayed at once. Pictures
of higher resolution than those in the Interlace mode
can be realized.
Interlace mode:
This is a conventional image method. Half of the
scanned lines displayed in the Progressive mode
will appear, alternating with the other half.