Enlarging The Picture (Zoom); Adjusting The Picture Quality (Vfp) - JVC CA-FSY1 Manual De Instrucciones

Enlarging the picture
(ZOOM)
(only for moving image)
1
Press ZOOM during playback or
while paused.
• Each time you press the button, the picture
magnification will be changed.
• (For a JPEG) You cannot change the
picture magnification during slide-show
playback.
2
Select the portion you want to
see by using cursor
• To resume normal playback, select "ZOOM
1
OFF" in Step .
Adjusting the picture
quality (VFP)
1
Press VFP during playback or
while paused.
The current setting will be displayed on the
TV screen.
• GAMMA: Adjust this if the neutral color is
bright or dark. The brightness of dark and
bright portion is maintained.
• BRIGHTNESS: Adjust this if the picture is
bright or dark on the whole.
• CONTRAST: Adjust this if the far and near
position is unnatural.
• SATURATION: Adjust this if the picture is
whitish or blackish.
• TINT: Adjust this if the appearance of flesh
tone is unnatural.
• SHARPNESS: Adjust this if the picture is
indistinct.
2
3
4
5/∞/2/3
.
5
6
7
NOTE
• If no operation is made for several seconds during
• "VFP" is an abbreviation of "Video Fine Processor".
Advanced operations
2/3
Press cursor
mode.
• It is recommended to select "NORMAL"
usually, or "CINEMA" in a dark room. When
either "NORMAL" or "CINEMA" is selected,
7
go to Step .
• When either "USER 1" or "USER 2" is
selected, the adjustment can be carried out
in detail in the operations after Step
5/∞
Press cursor
item to be adjusted.
Press ENTER.
Ex.:
GAMMA
5/∞
Press cursor
value.
Press ENTER.
To adjust other items, go back to Step
Press VFP to go off the window.
the procedure, the settings made so far will be
automatically stored.
to select VFP
3
.
to select an
TV screen
to change the
3
.
25