Safety System; Switching Off A Burner; Power Levels - Siemens ER626PB90E Manual De Instrucciones

Safety system

Thermocouple
Ignition
sparker

Switching off a burner

Power levels

Control knob
Setting
off
Maximum
capacity or
High
aperture and
flame
electricity
on
Minimum
Low
capacity or
flame
aperture
All manuals and user guides at all-guides.com
Depending on the model, your hob may have a safety
system (thermocouple) that prevents the flow of gas if the
burners accidentally switch off. To ensure that this device
is active, switch on the burner as usual and, without
releasing the control knob, press and hold it down firmly
for 4 seconds after lighting the flame.
Turn the corresponding control knob clockwise to the 0
setting.
Los mandos progresivos le permiten regular la potencia
que necesite entre los niveles máximo y mínimo.
For dual double-flame burners, the inner and outer
flames can be controlled separately.
The available power levels are as follows:
Inner and outer flame on full power.
Outer flame on minimum, inner flame on full power.
Inner flame on full power.
9