Publicidad
Idiomas disponibles
Idiomas disponibles
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery.
Remove rear shelf, boot cover and container in boot. Remove covers inside boot near tail standing lights.
2.
In order to connect electric bunch to connection socket drill a 6mm diameter hole on the right side of vehicle, in
3.
spare wheel well. Expand existing hole to 20mm diameter. Secure the hole with anti-corrosion agent.
4.
Connect the cable set in the following way:
a) Draw end of lead bunch with metal lead ends through the place referred to in point 3 from boot outside and
through a hole by connection socket handle, assemble supplied grommet in the drilled hole,
Draw attached rubber socket retaining plate over,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
Electrical Set for Trailer Connection
7-pin
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
black/white
2
(54-G)
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
8
(58-b)
Contact description
Cable colour
1
black/white
2
2a
3
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
rown 2,5mm
12
13
white/brown 2,5mm
Part no. 011-398
Part no. 014-038
Honda HR-V Jeep manufactured 04.99-
10 Cable ties 100mm
3 Cable ties 300mm
1 Rubber grommet
2
2
2
2
1 Sheet-metal screw
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
9
7
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket
Publicidad
