Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
44 07 05 07/13 / 05.06 / VA
Packing list: 2 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery
2.
Remove both rear lights.
3.
In order to draw both electric bunches to connection socket, dismantle from vehicle both rubber fair-leads located
under rear lights. Make two holes in both fair-leads for electric bunches. Again, build in fair-leads.
4.
Connect the cable set in the following way:
a) draw end of 6-lead bunch in 7-pin set, 10-lead bunch in 13-pin set with metal cable end through the opening
described in p.3 from left rear lights outside, draw end of 4-lead bunch in 7-pin set, 5-lead bunch in 13-pin set
with metal cable end from right rear lights outside, lead both bunches through the opening in connecting socket
handle,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
6.
Disconnect plug beside right standing lights and connect it with suitable joint in electric bunch. Connect remaining
plug of electric bunch to right standing lights.
Electrical Set for Trailer Connection
Part no.:
7-pin
Part no.:
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
white / black
2
(54-G)
grey 2x
3
(31)
brown
4
(R)
green / black
5
(58-R)
grey / red
6
(54)
red / black
7
(58-L)
grey / black
8
(58-b)
grey / white 2x
Contact description
Cable colour
wwhite / black
1
2
grey 2x
2a
grey / white 2x
3
brown
4
green / black
5
grey / red
6
red / black
7
grey / black
8
blue / red
9
red/blue 2,5mm
10
yellow 2,5mm
11
white / brown 2,5mm
12
13
white/brown 2,5mm
004-468
Citroen Berlingo manufactured 10.96-
Peugeot Partner manufactured 10.96-
007-748
Citroen Berlingo manufactured 10.96-
Peugeot Partner manufactured 10.96-
6 Cable ties 300 mm
6 Cable ties 100 mm
1 Sheet-metal screw
2
2
2
2
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
7
9
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket
Publicidad
Tabla de contenido
