Publicidad
Idiomas disponibles
Idiomas disponibles
Packing list: 1 Cable set
1 Socket
1 Socket retaining plate
1.
Disconnect the earth lead from the battery
2.
Dismantle boot floor screens and vehicle rear lights screens. Remove right rear standing lights.
3.
In order to draw electric bunch to connection socket, drill a hole of 6 mm diameter in proper place of vehicle rear
wall (in the recess before lock handle). Increase the diameter to 20mm. Secure it with anti-corrosion remedy.
4.
Connect the cable set in the following way:
a) Pull the end of cable set with metal terminal and attached rubber grommet through the hole described in point 3
from boot outside to socket mounting point, mount the rubber grommet in the hole,
b) Draw attached rubber socket retaining plate over the end of cable set (if necessary use anti-friction agent),
c) Disassemble the socket and connect cables according to the following assignment:
7 pin
Function
Indicator left
Fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Fog light
13 pin
Function
Indicator left
Trailer fog light
Rear fog light
Earth
Indicator right
Tail light right
Stop light
Tail light left
Reversing light
Trailer current supply
Charge line plus
Charge line earth
Not assigned
Earth (trailer)
5.
Push the socket with rubber retaining plate and screw the socket tightly onto the retaining plate using the supplied
nuts and screws:
a) Pay special attention to the right position of rubber retaining plate,
b) Put the cable set gently to avoid any folds and to secure it from possible wiping.
6.
Draw end of the bunch with R marker along the bunch in vehicle to right rear lights:
a) Disconnect right rear lights joint in vehicle and connect with suitable joint in electric bunch
b) Connect remaining electric bunch joint with right lights joint.
Electrical Set for Trailer Connection
Part no.:
7-pin
Part no.:
13-pin
3 Screws M5X35
3 Nuts M5
3 Spring washer
Installation instruction
Contact description
Cable colour
1
(L)
black/white
2
(54-G)
3
(31)
brown
4
(R)
black/green
5
(58-R)
grey/red
6
(54)
black/red
7
(58-L)
grey/black
8
(58-b)
Contact description
Cable colour
1
black/white
2
2a
3
brown
4
black/green
5
grey/red
6
black/red
7
grey/black
8
blue/red
9
red/blue 2,5mm
10
yellow 2,5mm
11
12
13
white/brown 2,5mm
009-738
Citroen Xsara Kombi manufactured 05.98-
013-668
Citroen Xsara Kombi manufactured 05.98-
10 Cable ties 100 mm
2 Cable ties 300 mm
1 Rubber grommet
2
2
2
2,5mm
2
1 Sheet-metal screw
1
2
6
7
3
5
4
8
Contact description in
7-pin socket
8
9
7
1
10
6
2
4
3
5
11
12
13
2a
Contact description in
13-pin socket
Publicidad
