19. Service
19.1 Spare parts, accessories and consumables
Only use accessories and spare parts approved by the manufacturer. If parts not approved
by the manufacturer are used, the operator is responsible for the conformity of the device
and the warranty will be voided.
Risk of injury: Injury to persons and damage or malfunction of the photometer or equipment
when using parts not approved by the manufacturer. The replacement parts in this section
are approved by the manufacturer.
Description
Rugged case with foam inlay for PF-12
Calibration cuvette
USB-cable A/B for data export and power supply
USB mains adapter for PF-12
Optional battery pack
Test tubes (20 pieces; 16 mm OD)
Operating instruction
VISOCOLOR
ECO Test instructions for PF-12
®
NANOCONTROL NANOCHECK 2.0
NANOCONTROL NANOTURB
19.2 Disposal
Disposal via public disposal systems is not permitted. Contact your local
MACHEREY-NAGEL representative.
Disposal according to EU Directive 2012/19/EU. In accordance with the EU Directive
2012/19/EU MACHEREY-NAGEL takes back the old device and disposes it free of
charge.
19.3 Warranty, liability and complaints
The warranty for this device is 24 months from date of purchase. The original invoice serves
as proof and must be presented when making a claim. In case of improper handling and / or
maintenance of the device, the warranty expires. It does not cover defects that are due to a
power supply other than the external power supply included in the delivery.
The warranty is limited to the repair of defective parts or - at MACHEREY-NAGEL's discretion
- the delivery of a faultless replacement unit. The warranty period of 24 months shall not be
affected by any warranty claim. There is no right of withdrawal. Further claims are excluded.
Manual Photometer PF-12
66
NOTICE
WARNING
Plus
, accessories and VISOCOLOR
Plus
with Euro plug (type C)
Plus
NOTICE
Plus
EN, V2.00, 08.2021
REF
914351.1
ECO test kits
®
916908
919687
919220
919201
91680
919252
931503
925703
925702