Preparing The Awc - Stel TIG μP 261H 1f Manual De Instrucciones

TIG µP 261H - 263H
TECHNICAL DESCRIPTION
5.5– PREPARING THE A.W.C.
INVERTER GENERATOR
The inverter generators TIG µP 261H DC and TIG µP 263H
DC are equipped for connection to the A.W.C. group
(ref.A), by inserting the special A.W.C. supply KIT.
With cod. 604880000L it is possible to connect the cooling
group A.W.C. cod. 60069000L.
It is necessary to switch on both the inverter generator and
the A.W.C. group.
5.6- PREPARING THE REMOTE/PEDAL/TORCH UP-DOWN
CONTROL
The remote / pedal and torch UP-DOWN controls allow regulation of the welding
current at a distance without acting directly on the generator.
The inverter generators TIG µP 261H DC and TIG µP 263H DC are provided with
a special coupling (ref.13 page 9) which allows the connection of the remote
control, of the pedal control (CAD) or of the torch UP–DOWN. When the REM ON
selection button (ref.6 page 9) is pressed quickly, remote control mode is switched
on; the REM ON led (ref.6A page 9) lights up. The welding current varies from a
minimum (4A) to a maximum which may be set on the machine with the regulating
encoder (ref.5 page 9), (from 4A to 100A)
It is also possible to choose the starting current by briefly pressing the selection
button REM ON (ref.6 page 9): the starting current will blink on the right-hand
display A (ref.20 page 9) and may be regulated by means of the general encoder
(ref.5 page 9) (from 4A to 100A).
To turn off the remote control function, hold down the REM ON button (ref.6 page
9) for more than 2 seconds.
OPERATION OF THE TORCH UP-DOWN
By inserting the torch connector in the special socket on the generator (ref. 13
page 9), you can access regulation of the welding current using the two buttons on
the grip of the torch. Pressing the top button increases the current to the value set
with the main encoder (ref.5 page 9); pressing the bottom button brings the current
down to the minimum value (4 A).
52
ENGLISH
COD. 6907600050
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TIG µP 261H - 263H
TECHNICAL DESCRIPTION
5.5– PREPARING THE A.W.C.
INVERTER GENERATOR
The inverter generators TIG µP 261H DC and TIG µP 263H
DC are equipped for connection to the A.W.C. group
(ref.A), by inserting the special A.W.C. supply KIT.
With cod. 604880000L it is possible to connect the cooling
group A.W.C. cod. 60069000L.
It is necessary to switch on both the inverter generator and
the A.W.C. group.
5.6- PREPARING THE REMOTE/PEDAL/TORCH UP-DOWN
CONTROL
The remote / pedal and torch UP-DOWN controls allow regulation of the welding
current at a distance without acting directly on the generator.
The inverter generators TIG µP 261H DC and TIG µP 263H DC are provided with
a special coupling (ref.13 page 9) which allows the connection of the remote
control, of the pedal control (CAD) or of the torch UP–DOWN. When the REM ON
selection button (ref.6 page 9) is pressed quickly, remote control mode is switched
on; the REM ON led (ref.6A page 9) lights up. The welding current varies from a
minimum (4A) to a maximum which may be set on the machine with the regulating
encoder (ref.5 page 9), (from 4A to 100A)
It is also possible to choose the starting current by briefly pressing the selection
button REM ON (ref.6 page 9): the starting current will blink on the right-hand
display A (ref.20 page 9) and may be regulated by means of the general encoder
(ref.5 page 9) (from 4A to 100A).
To turn off the remote control function, hold down the REM ON button (ref.6 page
9) for more than 2 seconds.
OPERATION OF THE TORCH UP-DOWN
By inserting the torch connector in the special socket on the generator (ref. 13
page 9), you can access regulation of the welding current using the two buttons on
the grip of the torch. Pressing the top button increases the current to the value set
with the main encoder (ref.5 page 9); pressing the bottom button brings the current
down to the minimum value (4 A).
52
ENGLISH
COD. 6907600050
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it