Complaints; Connection - Stel TIG μP 261H 1f Manual De Instrucciones

ENGLISH
TIG µP 261H - 263H
COD. 6907600050
3.0- RECEIVING
3.1– RECEIVING THE MATERIAL
The TIG µP 261H is composed of:
1°) composition GEN TIG µP 261H + KIT SALES CODE 605480000L :
- N°1 generator cod.
- N°1 earth cable cod.
- N°1 setting up kit cod.
- N°1 package cod.
The TIG µP 263H is composed of:
1°) composition GEN TIG µP 263H + KIT SALES CODE 605960000L :
- N°1 generator cod.
- N°1 earth cable cod.
- N°1 setting up kit cod.
- N°1 package cod.
Check that all the material listed above is included in the package. Notify your
distributor if anything is missing. Ensure that the generator has not been damaged
during transport. If there is any visible damage, see the COMPLAINTS section (Par.
3.2) for instructions. Read this instructions manual carefully before working with the
generator

3.2- COMPLAINTS

Complaints for damage during transport: If your equipment is damaged during
transport, send a complaint in writing to the carrier.
Complaints for faulty goods: All the equipment shipped by STEL SRL has
been subjected to strict quality control. However, if your equipment does not work
correctly, consult the TROUBLESHOOTING section in this manual. If the fault
persists, consult your authorized dealer.

4.0- CONNECTION

4.1- PRIMARY CONNECTION
INSTALLATION
WARNING: This Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low-voltage supply system. There may be
potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.
This equipment does not comply with IEC 61000-3-12. If it is connected to a public low
voltage system, it is the responsibility of the installer or user of the equipment to ensure, by
consultation with the distribution network operator if necessary, that the equipment may be
connected.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
TECHNICAL DESCRIPTION
605470000L
602030000L
608020000L
6704400000
605490000L
602030000L
608020000L
6704400000
ENGLISH
3.0- RECEIVING
3.1– RECEIVING THE MATERIAL
The TIG µP 261H is composed of:
1°) composition GEN TIG µP 261H + KIT SALES CODE 605480000L :
- N°1 generator
- N°1 earth cable
- N°1 setting up kit
- N°1 package
The TIG µP 263H is composed of:
1°) composition GEN TIG µP 263H + KIT SALES CODE 605960000L :
- N°1 generator
- N°1 earth cable
- N°1 setting up kit
- N°1 package
Check that all the material listed above is included in the package. Notify your
distributor if anything is missing. Ensure that the generator has not been damaged
during transport. If there is any visible damage, see the COMPLAINTS section (Par.
3.2) for instructions. Read this instructions manual carefully before working with the
generator
3.2- COMPLAINTS
Complaints for damage during transport: If your equipment is damaged during
transport, send a complaint in writing to the carrier.
Complaints for faulty goods: All the equipment shipped by STEL SRL has
been subjected to strict quality control. However, if your equipment does not work
correctly, consult the TROUBLESHOOTING section in this manual. If the fault
persists, consult your authorized dealer.
4.0- CONNECTION
4.1- PRIMARY CONNECTION
INSTALLATION
WARNING: This Class A equipment is not intended for use in residential locations where
the electrical power is provided by the public low-voltage supply system. There may be
potential difficulties in ensuring electromagnetic compatibility in those locations, due to
conducted as well as radiated disturbances.
This equipment does not comply with IEC 61000-3-12. If it is connected to a public low
voltage system, it is the responsibility of the installer or user of the equipment to ensure, by
consultation with the distribution network operator if necessary, that the equipment may be
connected.
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
41 http: www.stelgroup.it
TIG µP 261H - 263H
TECHNICAL DESCRIPTION
COD. 6907600050
cod. 605470000L
cod. 602030000L
cod. 608020000L
cod. 6704400000
cod. 605490000L
cod. 602030000L
cod. 608020000L
cod. 6704400000
41