Intermittence Cycle And Excess Temperature - Stel TIG μP 261H 1f Manual De Instrucciones

ENGLISH
TIG µP 261H - 263H
COD. 6907600050
8.3-
INTERMITTENCE CYCLE (ED) AND EXCESS TEMPERATURE
The intermittence cycle is the percentage of use of the welding machine in 10
minutes which the operator must respect so as to avoid blocking of the power
supply due to excess temperature.
If the machine goes into excess temperature :

the yellow led (ref. 3 page 9) lights up.

it is necessary to wait about 10 minutes before resuming welding.

the welding current or the work cycle must be reduced to avoid further
blocking of the power supply.
100% ED (intermittence cycle)
Continuous weld
60% ED (intermittence cycle)
10 minutes
Weld 6 minutes
35% ED (ciclo intermittenza)
35% ED (intermittence cycle)
10 minutes
Weld 3 minutes
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
http: www.stelgroup.it
FIGURES
10 minutes
10 minutes
Wait 4 minutes
10 minutes
Wait 7 minutes
ENGLISH
8.3-
INTERMITTENCE CYCLE (ED) AND EXCESS TEMPERATURE
The intermittence cycle is the percentage of use of the welding machine in 10
minutes which the operator must respect so as to avoid blocking of the power
supply due to excess temperature.
If the machine goes into excess temperature :

the yellow led (ref. 3 page 9) lights up.

it is necessary to wait about 10 minutes before resuming welding.

the welding current or the work cycle must be reduced to avoid further
blocking of the power supply.
Weld 6 minutes
Weld 3 minutes
STEL s.r.l. – Via del Progresso n° 59 – 36020
Loc. Castegnero (VICENZA) - ITALY
TEL. +39 444 639525 (central.) – +39 444 639682 (comm.)
FAX +39 444 639641 – E-mail:stelgroup.com
63 http: www.stelgroup.it
TIG µP 261H - 263H
COD. 6907600050
100% ED (intermittence cycle)
10 minutes
Continuous weld
60% ED (intermittence cycle)
10 minutes
10 minutes
Wait 4 minutes
35% ED (ciclo intermittenza)
35% ED (intermittence cycle)
10 minutes
10 minutes
Wait 7 minutes
FIGURES
63