Zeiss DTI 3/25 Instrucciones De Uso página 14

System
The "System" submenu has the following options:
• Factory Reset: Select "Factory Reset" to reset the device to the factory settings.
This also deletes all data saved on the device, including images and videos.
• Reset Settings: Select "Reset Settings" to reset all settings to the default values
for the device.
• Language settings: Select a menu language here.
• Date / Time: Set the date and time of the device here.
You can also view the following information:
• WLAN SSID: The name of the WLAN hotspot is displayed here.
• Firmware Version: The current firmware version is displayed here.
WLAN SSID:
Firmware:
Factory Reset
Reset Settings
Factory Reset
Reset Settings
Language settings
Date / Time
System
Factory reset
To perform a factory reset, select "System" in the main menu. Then navigate to
"Factory Reset". Select "Yes" and confirm your selection. A second security prompt
follows, which must also be confirmed with "Yes".
Reset settings
To reset the settings, select "System" in the main menu. Then navigate to "Reset
Settings". Select "Yes" and confirm your selection.
Note: The device must be restarted for the reset of the settings to be completed
successfully.
Personal data when you dispose of or pass on your ZEISS device
Remember that there may be personal photos and videos on the internal device
memory. Before passing on the device to a third party, please perform the factory reset
to delete this data and verify it has been deleted. By doing so, you help maintain your
privacy and data security.
Cooperation on device safety
Please take an active role in protecting the IT security of your device by using the ZEISS
Hunting App and installing new firmware updates as soon as they become available.
2
X
ZEISS_DTI3_000001
01020103230105
No
No
No
No
English
English
...
Exit
Date and time
Select "System" in the main menu to set the date and time. Then navigate to "Date /
Time". You can now set the year, month, day, hour and minute individually. The "Time
Format" setting allows you to choose between 24-hour and 12-hour display. Be sure to
set the current date and time, as your photos and videos will be time stamped.
Year
Month
Day
Time Format
Factory Reset
Hour
Reset Settings
Minute
Exit
System
Note: If the battery is completely discharged, the device loses the set date and time.
Reset the date and time so that your images and videos get a correct timestamp.
Firmware update
A firmware update can be carried out using the ZEISS Hunting App. Follow
the instructions for this in the ZEISS Hunting App.
Note: Make sure that the device is fully charged before updating the firmware. Do not
switch off the device during the update, otherwise it may be damaged.
Note: If you initiate an update via the ZEISS Hunting App, you must confirm this again
on the device for security reasons.
LED status
Operating status Charge state
Power-up
Normal
operating Does not charge
condition
Does not charge
(low charge level)
Charging
Charging (fully charged)
Standby Does not charge
Does not charge
(low charge level)
Charging
Charging (fully charged)
Off Does not charge
Charging
Charging (fully charged)
Note: To avoid fading in the dark, the brightness of the LED is kept low. The LED may
therefore sometimes be only barely visible in daylight.
1
X
2020
01
24
24h
No
14
No
59
English
Exit
LED color LED status
- -
Green Constant
Red Flashing
Red Constant
Green Constant
Green Flashing
Red Flashing
Red Constant
Green Constant
- -
Red Constant
Green Constant
14 | 200 EN