MOTOR UNBLOCKING
In the case of a power failure, the gate can be unblocked by operating the motor:
1. Open the lock cover located on the front of the motor
2. Introduce the key L in the unlocking system lock and turn the unlocking key (1) 90º anti-clockwise
To reset the automation device, proceed as follows:
1. Introduce the key L in the unlocking system lock and turn the unlocking key 90º clockwise
2. Close the lock using the cover
ELECTRICAL CONNECTIONS
DX motor
YELLOW - GREEN
GND
BROWN
CLOSING
BLACK
OPENING
GREY
COMMON
RED - WHITE
ELECTRO-BRAKE
WARNING: always remember to connect the earth according to current standards (EN 60335-1, EN 60204-1).
SX motor
GND
OPENING
CLOSING
COMMON
ELECTRO-BRAKE
12