Filter Cartridge Replacement; Spare Parts List - SATA 400 Instrucciones De Servicio

Operating instructions SATA filter 400

7. Filter cartridge replacement

Remove filter tube with the pivot wrench included with the unit. For the sintered filter, uns-
crew diverter (Order No. 24521), cyclone tube (Order No. 22137) and sintered filter (Order
No. 22160). For the fine filter and activated charcoal filter, unscrew retainer (Order No.
24562) and remove filter cartridge. During the assembly in reverse order, please strictly
observe that the fine filter cartridge (blue), respectively the activated charcoal cartridge
(black) are installed in the correct filter stage. For an easy identification, a coloured label
(sleeve blue, resp. black) is mounted on the respective thread rods. Furthermore, the filter
housing is furnished with a coloured label (label filter exchange in respective colours).
Please ensure perfect fit, resp. damage-free O-ring.
Please note! After having cleaned the filter sleeve, please slightly grease the thread
with SATA high performance grease allowing an easy mounting of the filter sleeve on
the filter housing.

8. Spare parts list

The spare parts drawing is to be found on the folding page at the end of the booklet.
94979 Parts are included in Service unit filter range 400
*
96750 Parts are included in packing set
Order No. Product description
2923 Spring
2949 Diaphragm, cpl.
15511 Automatic condensate outlet valve
22046 Pressure gauge 0-10 bar (0-150 psi) for SATA filter 400 series
22137 Cyclone tube for SATA filter 414 and SATA filter 424
22160 Sintered filter for SATA filter 414 and SATA filter 424
23804 Pressure valve cpl., for SATA filter 424
24471 Plastic nut with 2 O-rings for SATA filter 400 series
24489 Threaded rod with pressure valve head for SATA filter 400 series
24521 Condensate retainer with O-ring for SATA filter 400 series
24554 Filter sleeve for SATA filter 414 and SATA filter 424 cpl. with automatic discharge valve
24562 Intermediate adapter cpl. with O-ring for filter line SATA filter 400
59295 Manifold cpl. SATA SATA filter 414 and SATA filter 424 reducing valve with 2 ball taps
73890 Threaded rod
78360 Sealing
80457 Spindle cpl.
81810 Fine Filter cartridge for SATA filter 434 and SATA filter 444, cpl. with O-ring
85357 Stud wrench for filter tube
85373 Activated charcoal cartridge for SATA filter 464
95000 Threaded joint, cpl., detachable
95851 Countersunk screw
96883 Regulating nut
96578 Fastening nut
121327 Ball tap, cpl. G 3/8 x G 1/4 outside G 1/4
Order no. without illustration
22319 Pressure gauge 0-10 bar (0-150 psi) for SATA filter 434
92569 Fixing kit for wall assembly
96743 Add-on module cpl., with 2 ball taps
Accessories
10934 Ball tap G 1/2 a
VIII.5