SATA 400 Instrucciones De Servicio página 50

Operating instructions SATA filter 400
9. Automatic condensate discharge
The automatic condensate discharger only functions properly when the filter is in the vertical position.
At a minimum inlet pressure of 1 bar / 15 psi, the discharge valve closes automatically. When the filter
is non-pressurized, the valve remains open(for function see paragraph 1.1). By turning the brass control
knob clockwise, condensation can be pressurized and discharged manually (valve opens, condensate
discharges). If the valve does not discharge, the filter has to be disassembled as outlined in paragraph 7.
Clean dirty or clogged condensate discharge valve in cleaning solvent and replace, if necessary. In case of
malfunction, blow condensate valve free from the outside with a maximum of 1 bar / 15 psi when the unit
is not pressurized. Replace, if necessary.
10. Warranty
Warranty in so far as the supplier has taken over a manufacturer's guarantee as stated in the offer.
a) The supplier grants a guarantee period of 12 months for this kind of equipment; the guarantee period
begins on the date of sale to the final customer.
b) The guarantee covers the material value of components with manufacturing and material faults which
are detected during the guarantee period. The guarantee does not cover any damage caused by
incorrect handling, normal wear or mechanical damage.
c) Any other further claims of any sort lodged against the supplier, particularly claims for damages, are
ruled out. This also applies to damages caused during consultation talks, instruction sessions and
demonstrations. The final customer's rights vis-à-vis his contracting partner remain unaffected.
d) If the customer requires immediate repair or replacement before ascertaining whether we as sup-
pliers are obliged to provide replacement, the replacement delivery or repairs are provided and will
be invoiced and paid according to the currently valid price. If further verification of the complaint
reveals that the customer is entitled to claim under the guarantee, the purchaser shall receive a credit
note corresponding to the guarantee service provided for the invoiced repair or replacement delivery.
Components for which replacements have been delivered become the property of the supplier again.
Notifications of faults or other complaints do not entitle the customer or his representative to refuse or
delay payment.
e) The unit is to be returned with transport costs paid. The supplier does not assume any costs for dele-
gating engineers (travelling time and costs) together with freight and packaging costs. The supplier's
conditions for the delegation of engineers apply here.
f) Any services provided under the guarantee do not prolong the guarantee period.
g) The guarantee becomes null and void in the event of any third-party interference.
h) The guarantee conditions are an integral part of the supplier's general conditions of delivery.
SATA can not be held responsible for injuries caused by non-observance of the operating instruction.
Subject to technical alterations.
VIII.6