Emmaljunga NXT90 CLASSIC Manual De Instrucciones Y Servicio página 35

5) ADJUSTING THE BACKREST IN THE CARRYCOT
5:1 Lift the plastic backrest, press out both of the plastic legs.
5:2 Press the two plastic legs so they rest on the metal bar.
6) FOLDING THE CARRYCOT
6.1 Remove the mattress.
Fold the plastic backrest towards the centre.
Open the press studs on the easy pull handle
(only on certain models).
6.2 Pull the bar using the easy pull handle along the
bottom of the carrycot. Repeat both in the foot end
and the head end.
Seat Unit Ergo
1) 1. ASSEMBLY AND USE OF THE SEAT UNIT
1.1 Seat Frame
Press both buttons on the sides of the footrest
to unfold.
1.2 Fold out both seat attachments.
1.3 Place the seat fabric cover over the top edge of
the seat frame.
1.4- 1.4.2 Thread the harness strap through the seat fabric
and then place the seat fabric around the seat
plate. Close the zipper underneath the seat.
1.5 Position the safety straps around the frame and
click into the buckle on the back of the backrest.
Repeat on the left and right side of the frame.
1.6 Fasten the press studs that secure the fabrics to
the frame on both sides.
1.7 Fasten the Velcro straps onto the footrest.
1.8 Click the back rest adjustment handle into the
bracket on both sides.
1.9 Thread the strap through the hole in the fabric
and fasten around the back rest adjustment
handle with the press stud.
1.10 Insert the bumper bar into the brackets on
both sides of the seat unit.
1.11 Fasten the crotch strap around the bumper bar.
WARNING It is important that the seat unit fabric
is always fitted correctly.
WARNING Never use this product without fully
assembling the seat unit fabrics onto the frame first.
WARNING The bumper bar should always be
assembled when in use.
WARNING Always check that the bumper bar
is correctly assembled before use.
WARNING Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
2) ASSEMBLY / USE OF THE HOOD
2.1 Attach the hood onto the seat frame tubes at
both sides.
WARNING Pinch point - Danger of trapping.
Please note: If the hood moves up and down on
the seat frame tube this can cause scratches.
Ensure the seat frame tube is free from dust and dirt.
2.2 Pull the inner fabric over the top of the seat
frame and secure with the higher press stud.
Repeat for the left and right sides.
2.3 Pull the outer fabric over the top of the seat
frame and secure with the lower press stud.
NXT90 Classic v 1.0
Repeat for the left and right sides (The centre
press stud is for use with the optional
footmuff/accessories only).
WARNING Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING The hood should always be fitted
when the pram is in use.
WARNING Never carry the stroller or the seat
unit by the hood.
3) ADJUST THE HOOD
3.1 Pull the hood gently forward or backward to the
desired position.
For ventilation, roll the fabric flap inwards on
the back of the hood. The insect net is now
visible.
4) INSECT NET (ACCESSORY)
4.1 Attach the Insect net using the zipper on the
hood. Pull the elasticated band of the insect
net completely over the front foot area.The net
is delivered with the chassis.
4.2 Use the press studs to secure the insect net
elasticated band onto the seat unit. Repeat on
the other side.
5) ASSEMBLY OF THE SEAT UNIT ON THE
CHASSIS
5.1 Click the seat unit into the chassis, making sure it
clicks in properly and securely. The seat unit can
be attached in the direction of travel or against
the direction of travel.
WARNING Ensure that children are kept away
from all moving parts of the pram to avoid risk
of injury.
WARNING Always check that the seat unit is properly
fixed firmly to the chassis before the pram is used.
6) OPEN THE BUMPER BAR
6.1 Unfasten the crotch strap. Press the button on the
inside of the bumper bar and open.
7) CLOSE THE BUMPER BAR
7.1 Click the bumper bar into the bracket until you
hear a "click".
Fasten the crotch strap around the bumper bar.
WARNING Ensure that children are kept away from
all moving parts of the pram to avoid risk of injury.
WARNING The bumper bar should always be
assembled when in use.
WARNING Always check that the bumper bar is
correctly assembled before use.
8) REMOVING THE SEAT UNIT FROM THE
CHASSIS
8.1 Pull both handles upwards and lift the seat unit off
the chassis
WARNING Ensure that children are kept away from
all moving parts of the pram to avoid risk of injury.
WARNING Never leave a child in the seat unit when
removing the seat unit.
EN
35