Sharp AR-153E N Manual De Instrucciones página 11

4
Gently push the paper tray back into the unit.
Downloaded from:
• After loading paper, to cancel the blinking
copying, press the clear (
and the start (
• Be sure that paper is free of rips, dust, wrinkles, and curled or bent edges.
• Make sure all the paper in the stack is the same size and type.
• When loading paper, ensure there is no space between the paper and
the guide, and check if the guide is not set too narrow causing the
paper to bend. Loading paper in these ways will result in document
skew or a paper jam.
• When not using the unit for an extended period, remove all paper from
the paper tray and store it in a dry place. If paper is left in the unit for
an extended period, the paper will absorb moisture from the air,
resulting in paper jams.
• When adding new paper to the paper tray, remove the old paper already
contained in the tray. Placing new paper on top of the paper already
contained in the tray may result in feeding two sheets at one time.
http://www.usersmanualguide.com/
) key. The
) indicator will light up.
without restarting
in the display will go out
2
9