Tuning - Teac T-R610 Manual Del Usuario

1
1 Press the STANDBY/ON button to turn the unit on.
< If the T-R610 is connected to the A-R610 with a remote
control cord, you can switch ON/standby both the A-R610
and the T-R610 by pressing the STANDBY/ON button of the
A-R610.
2 Select AM or FM by pressing the BAND button.
3
Select the station you want to listen to (auto selection).
Hold down the TUNING button (‡ or °) until the frequency
display begins to change. When a station is tuned in, the
tuning process will stop automatically.
< Press the TUNING button (‡ or °) to stop the auto
selection.
Selecting stations which cannot be tuned automatically
(manual selection)
When the TUNING button (‡ or °) is pressed momentarily,
the frequency changes by a fixed step.
Press the TUNING button (‡ or °) repeatedly until the
station you want to listen to is found.
All manuals and user guides at all-guides.com

Tuning

FM MODE Button
3
Pressing this button alternates between Stereo mode and
Mono mode.
2
Stereo:
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights on the display.
Mono:
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced monaural, reducing
unwanted noise.
7