Maxon GPTLR Serie Instrucciones

LIFT CORPORATION
INSTRUCTIONS, GPTLR MODULAR EXTENSION PLATE
Installing and maintaining a liftgate can expose you to chemicals, including lead,
which are known to the State of California to cause cancer and birth defects, or
other reproductive harm. To minimize exposure, install and maintain liftgate in a
well-ventilated area and wear proper Personal protective equipment (PPE). For
more information go to www.P65Warnings.ca.gov.
• To prevent aluminum platform from being damaged, make sure vehicle frame
is cut correctly, and rear sills are modifi ed if over 5" in height. If the cutouts are
incorrect, platform may hit vehicle frame or underbody when stowing the Lift-
gate. The bottom of the platform may also hit the sill.
• Installer is responsible for ensuring that vehicle body and frame modifi cations
do not adversely affect the integrity of the body and frame.
NOTE: The following instructions are for installing the GPTLR MODULAR EXTEN-
SION PLATE with GPTLR Liftgates. Use this instruction sheet instead of the
vehicle frame cutout instructions, and instructions for cutting the rear sill on the
vehicle body, in GPTLR Installation Manual M-18-14.
NOTE: This extension plate was designed for a 102" wide body (FIG. 1-1). However,
this installation is intended to be on a 96" wide body.
3"
EXTENSION PLATE DIMENSIONS FOR GPTLR-25/33 & GPTLR-44/55
Estas instrucciones están disponibles en español a partir de la última página.
Estas instrucciones están disponibles en español a partir de la página 4.
© MAXON Lift Corp. 2020
Sht. 1 of 6 DSG#
WARNING
!
CAUTION
102"
79"
FIG. 1-1
M-20-16
Rev. - Date: 11/02/20
3"