Maxon GPTLR Serie Instrucciones página 3

LIFT CORPORATION
NOTE: Refer to vehicle body manufacturer for best practices to reinforce cutout areas
in the rear sill.
2. If necessary, cut trailer rear sill as
shown in FIGS. 3-1 or 3-2.
3. To complete Liftgate installation, refer
to remaining installation instructions in
GPTLR Installation Manual M-18-14.
© MAXON Lift Corp. 2020
Sht. 3 of 6 DSG#
34"
REAR SILL CUTS FOR GPTLR-25 & GPTLR-33
34"
REAR SILL CUTS FOR GPTLR-44 & GPTLR-55
M-20-16
FIG. 3-1
FIG. 3-2
Rev. - Date: 11/02/20