Technical Parameters - YATO YT-82814 Manual Original

CHARACTERISTICS OF TOOL
Reciprocating saw is a tool for the cutting the wood surfaces and surfaces which are made of wood-based materials, plates of
polyethylene or polypropylene, or metal by using the appropriately selected blades to the type of material. Due to easy exchange
of blades, which does not require any additional tools,, the saw allows for an extensive use in construction works. Correct, reliable,
and safe operation of the device is dependent on its proper use, therefore:
Prior to working with the tool, you should read all the instruction and keep it around.
For any injury and damage, which are resulting from failure to comply with its designation, lack of compliance with the safety
regulations and instructions of this manual, the supplier is not responsible. The tool misuse causes also the loss of user's rights
to the guarantee, as it would be a non-compliance with the contract.
EQUIPMENT
The product is supplied in a complete state and requires no assembly. The product is supplied with the battery charger and
charging station (charger).
Attention! The product of the catalog number: YT-82815 has not been equipped with a rechargeable battery and charging station.

TECHNICAL PARAMETERS

Parameter
Catalog number
Rated voltage
Rated revs
Cutting thickness (max.)
- wood
- metals
Blade holder
Blade travel
Noise level
- acoustic pressure
- power
Vibration (cutting board / wooden beam)
Degree of protection
Insulation class
Weight
Type of the battery
Capacity of the battery*
Charger*
Input voltage
Mains frequency
Output voltage
Input current
Rated power
Time of charging**
* only for models equipped with battery and charger
* * charging time applies only to the battery with a capacity listed in table
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
Keep all warnings and instructions for future reference.
The term "power tool" used in warnings applies to all tools driven by power both wired and wireless.
Workplace safety
Keep the workplace well-lit and clean. Disorder and poor lighting can be causes of accidents.
O R I G I N A L
GB
Unit
[V]
[min -1 ]
[mm]
[mm]
[mm]
[dB(A)]
[dB(A)]
[m/s 2 ]
[kg]
[Ah]
[V]
[Hz]
[V]
[mA]
[W]
[h]
I N S T R U C T I O N S
Value
YT-82814, YT-82815
18 DC
0 - 3000
80
10
Universal 1/2 „(12.7 mm)
25.4
81.0 ± 3.0
92.0 ± 3.0
7,5 ± 1,5 / 8,3 ± 1,5
IPX0
III
1.6
Li-Ion
2
220 - 240
50 / 60
21 DC
2.4
60
1
13