Receiving Traffic Announcements; Built-In Cd Player; Basic Operations - Pioneer DEH-2120UB Manual De Instrucciones

Operating this unit
Limiting stations to regional
programming
When AF is used, the regional function limits
the selection of stations broadcasting regional
programs.
1 Use MULTI-CONTROL to select REGION
in the function menu.
2 Press MULTI-CONTROL to turn the re-
gional function on.
# To turn off, press MULTI-CONTROL again.
Notes
! Regional programming and regional networks
are organized differently depending on the
country (i.e., they may change according to
the hour, state or broadcast area).
! The preset number may disappear from the
display if the tuner tunes in a regional station
which differs from the originally set station.
! The regional function can be turned on or off
independently for each FM band.

Receiving traffic announcements

TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross-references
TP stations).
1 Tune in a TP or enhanced other net-
work's TP station.
TP indicator lights.
2 Press TA/AF to turn traffic announce-
ment standby on.
# To turn off, press TA/AF again.
3 Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4 Press TA/AF while a traffic announce-
ment is being received to cancel the an-
nouncement.
The tuner returns to the original source but re-
mains in the standby mode until TA/AF is
pressed again.
# You can also turn this function on or off in the
menu that appears by using MULTI-CONTROL.
Notes
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other network's TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.

Built-in CD Player

Basic Operations

% Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# When loading a disc, face the label side of
a disc up.
% Eject a CD (CD-ROM)
Press h (eject).
% Select a folder
Press a or b.
% Select a track
Press c or d.
% Fast forward or reverse
Press and hold c or d.
# When playing compressed audio, there is no
sound on fast forward or reverse.
Section
02
11
En