Receiving Traffic Announcements; Using Pty Functions; Searching For An Rds Station By Pty Information - Pioneer DEH-P75BT Manual De Instrucciones

Reproductor de cd/mp3/wma/acc de alta potencia con tecnología inalámbrica bluetooth, sintonizador rds y control de cd múltiple
Ocultar thumbs Ver también para DEH-P75BT:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

RDS
Receiving traffic
announcements
TA (traffic announcement standby) lets you re-
ceive traffic announcements automatically, no
matter what source you are listening to. TA
can be activated for both a TP station (a sta-
tion that broadcasts traffic information) or an
enhanced other network's TP station (a station
carrying information which cross-references
TP stations).
1
Tune in a TP or enhanced other net-
work's TP station.
When you are tuned into a TP or enhanced
other network's TP station the TP (
tor will light.
2
Press TA/NEWS to turn traffic an-
nouncement standby on.
Press TA/NEWS and TA ON appears in the
display. The tuner will stand-by for traffic an-
nouncements.
# To turn traffic announcements standby off,
press TA/NEWS again.
3
Use MULTI-CONTROL to adjust the TA
volume when a traffic announcement be-
gins.
Rotate it to increase or decrease the volume.
The newly set volume is stored in memory and
recalled for subsequent traffic announce-
ments.
4
Press TA/NEWS while a traffic an-
nouncement is being received to cancel the
announcement.
The tuner returns to the original source but re-
mains in the standby mode until TA/NEWS is
pressed again.
# You can also cancel the announcement by
pressing SOURCE, BAND or MULTI-CONTROL
while a traffic announcement is being received.
Notes
! You can also turn the TA function on or off in
the menu that appears by using
MULTI-CONTROL.
! The system switches back to the original
source following traffic announcement recep-
tion.
! Only TP and enhanced other network's TP sta-
tions are tuned in during seek tuning or BSM
when TA is on.

Using PTY functions

) indica-
You can tune in a station by using PTY (pro-
gram type) information.
Searching for an RDS station by
PTY information
You can search for general types of broadcast-
ing programs, such as those listed on page
26.
1
Use MULTI-CONTROL to select
PTY search in the function menu.
PTY search appears in the display.
2
Push MULTI-CONTROL left or right to
select a program type.
There are four program types:
News&INF—Popular—Classics—Others
3
Press MULTI-CONTROL to begin the
search.
When you press MULTI-CONTROL the pro-
gram type name in the display begins to flash.
The unit searches for a station broadcasting
that program type. When a station is found its
program service name is displayed.
PTY (program type ID code) information is
listed on page 26.
Section
05
23
En

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido