aquatermic XK46 Manual Del Usuario página 28

Wired Controller XK46
finish setting.
(3) Press ENTER/CANCEL button to return to last step until exists setting
parameters.
The parameter setting list is as following:
Parame
ter Parameter name
code
Set master indoor
P10
unit
Set infrared receiver
P11
of wired controller
Table 3.2 Parameter setting list
Parameter
range
00: do not
change
current
master/slave
state of indoor
unit
01: set current
indoor
unit as master
indoor unit
00: forbidden
01: activated
22
Defa
ult
valu
e
When set the corresponding indoor
unit of wired controller as master
00
indoor unit,"MASTER" icon will be
bright after finishing setting.
It can be set only through master
wired controller.
When infrared receiver of wired
01 controller is forbidden, the wired
controller can't receive the signal
from remote controller and it is
operated through buttons.
Note