aquatermic XK46 Manual Del Usuario página 57

Fig.4.16 Save Setting for Cooling in Fahrenheit
Save Setting for Heating: When unit is on and under Heating, 3D Heating and
Space Heating modes, press FUNCTION button to select Save function. "
will blink and MAX icon lit up. Press "
temperature. Press ENTER/CANCEL button to turn on this function.
Turn off Save Function: Press FUNCTION button and select Save function.
" " icon blinks. Then press ENTER/CANCEL button to cancel this setting.
Note: When the Save function is turned on and then set temperature exceeds
the limit value for Save function, "
give out two sounds successively.
" or " " button to adjust the MAXIMUM
" icon blinks three times and then buzzer will
51
Wired Controller XK46
" icon