Clock Setting; Clock Timer - aquatermic XK46 Manual Del Usuario

4.5.2 Clock Setting

Clock display: when the timer setting way is clock timer, timer zone displays
system clock in unit On and Off status. "
set at this time.
Clock setting: long press TIMER button for 5s to enter clock setting and
"icon is blinking. Pressing "
"
time by 1min; holding "
by 10min; Press ENTER/CANCEL button or TIMER button to save the setting and
then exit setting.

4.5.3 Clock Timer

Unit On/Off at a certain time can be set through clock timer.
Set Timer:
(1) Press TIMER button to enter timer on setting and the "ON" icon is blinking;
(2) Press " " or "
button to finish setting;
(3) Before pressing ENTER/CANCEL button, pressing TIMER button can save
unit On time and then switch to unit Off time setting with "OFF" icon
blinking;
(4) Press " " or "
button to finish setting;
Cancel Timer:
Press TIMER button to enter timer setting; press TIMER button again to switch
" or "
" or " " button for 5s increases or decreases clock time
" button to adjust unit On time. Press ENTER/CANCEL
" button to adjust unit Off time. Press ENTER/CANCEL
33
Wired Controller XK46
"icon is bright and the clock can be
" button increases or decreases clock