X-Fan Setting - aquatermic XK46 Manual Del Usuario

Note:
Description on cleaning level: When setting the Filter Clean Reminder
Function, timer zone will display 2 digits, of which the former indicates the pollution
degree of operating place and the latter indicates the operating time of indoor unit.
There are 4 types of situations:
Cleaning
Level
Turn off
Timer zone shows 00
Clean
The former digit shows 1 while the latter one shows 0, which indicates the
Slight accumulating operating time is 5500 hours. Each time the latter digit increases
Pollution 1, the operating time increases 500 hours. When it reaches 9, it means the
operating time is 10000 hours.
The former digit shows 2 while the latter one shows 0, which indicates the
Medium accumulating operating time is 1400 hours. Each time the latter digit increases
Pollution 1, the operating time increases 400 hours. When it reaches 9, it means the
operating time is 5000 hours.
The former digit shows 3 while the latter one shows 0, which indicates the
Heavy accumulating operating time is 100 hours. Each time the latter digit increases 1,
Pollution the operating time increases 100 hours. When it reaches 9, it means the
operating time is 1000 hours.

4.13 X-FAN SETTING

X-fan Function: If unit is turned off under Cooling or Dry mode, the evaporator
of indoor unit will be dried off automatically to prevent bacteria and mould from
gathering.
Description of Levels
55
Wired Controller XK46