aquatermic XK46 Manual Del Usuario página 54

Wired Controller XK46
Fig.4.14 Save Setting for Cooling in Fahrenheit
Start up Save function for Heating: When the unit is off, simultaneously press
"TIMER" and " " buttons for 5s, the buzzer will give out a sound and then unit will
enter into Save setting mode.
on. Press "MODE" button to switch to Heating or 3D Heating or Space Heating
mode. Press " " or " " button to adjust the temperature limit for Save function.
Press "ENTER/CANCEL" button to start up Save function.
After starting up save function, it will display "
and off status.
Cancel save function:
When the unit is off, press "TIMER" and " " buttons for 5s to enter into save
" icon is blinking. "MAX" icon and Mode icon are
48
" icon for all modes under on