Sleep Setting; Air Setting - aquatermic XK46 Manual Del Usuario

Note:
① When Quiet function is enabled, indoor unit will operate at quiet fan speed.
Fan speed is lowered so as to reduce the noise of indoor fan motor.
② When Auto Quiet function is enabled, indoor unit will change fan speed
automatically according to room temperature. After room temperature
reaches a set point, unit will operate at quiet fan speed.

4.8 SLEEP SETTING

Sleep Function: in this mode, the unit will operate according to the preset
sleep curve to provide comfortable sleep environment.
Turn on/off Sleep Function: in unit On status, press SLEEP button to
or cancel Sleep function.
When Sleep function is activated, "
mode is also activated.
When Sleep function is closed, if quiet function is activated before starting
Sleep function, only sleep function is closed while quiet function is still activated;
Under Auto, Fan or Floor Heating mode, this Sleep function is not available.

4.9 AIR SETTING*

Air Function: Adjust the amount of indoor fresh air to improve air quality and
keep indoor air fresh.
Turn on Air Function: When unit is on or off, press FUNCTION button and
select Air. " " icon will blink and the unit enters into Air setting. Temperature
" icon is bright and quiet or auto quiet
41
Wired Controller XK46
activate.