Filter Clean Reminder Setting - aquatermic XK46 Manual Del Usuario

Wired Controller XK46

4.12 FILTER CLEAN REMINDER SETTING

Filter Clean Reminder Function: Unit will remember its own operating time.
When the setting time is up, this function will remind you to clean the filer. A dirty
filter will result in bad heating and cooling performance, abnormal protection,
bacteria gathering, etc.
Turn on Filter Clean Reminder Function: When unit is on, press FUNCTION
button and select Filter Clean Reminder. "
button to adjust the cleaning level, of which the range is 00, 10-39. Press
ENTER/CANCEL to turn on this function
Turn off Filter Clean Reminder Function: When unit is on and this function has
been turned on, press FUNCTION button and select Clean. Then "
blink. Set the cleaning level as 00 and press ENTER/CANCEL function to cancel
this setting.
When Filter Clean Reminder time is up, "
to clean the filer. Press FUNCTION button to turn to Filter Clean Reminder
Function, then press SWING/ENTER to cancel reminding, and it will retime
according to the original cleaning level. The clean reminding can be cancel only
when you didn't reset the cleaning level under the setting of Filter Clean Reminder
Function.
Fig.4.17 or 4.18 Shows how to turn on Filter Clean Reminder function:
" icon will blink. Press "
" icon will light up to remind you
52
" or " "
" icon will