Black 9/16" Large Head Screw - Sauder Dakota Pass 419440 Instrucciones De Montaje

Step 13
Insert the DOOR STOPS (4I) into the exact holes shown in the SPACERS (U and V).
å
Push the LARGE RUBBER SLEEVES (58G) onto the METAL BRACKETS (4G). The RUBBER SLEEVES will be a tight fi t.
å
Fasten the METAL BRACKETS (4G) to the LOWER SPACER (U). Use two BLACK 9/16" LARGE HEAD SCREWS (1S).
å
NOTE: Be sure to position the BRACKETS exactly as shown in the enlarged diagram.
å
Fasten the SHELF MOLDINGS (R) to the BOTTOM (D) and SHELF (E). Tighten four HIDDEN CAMS.
å
Fasten the LOWER SPACER (U) to the SHELF MOLDING (R) on SHELF (E). Tighten two HIDDEN CAMS.
å
Maximum
210 degrees
Minimum
190 degrees
These surfaces
should be even.
These surfaces
should be even.
www.sauder.com/services
Surface with
HIDDEN CAMS
Arrow
R
U
R
E
D
U
58G
Edge without
CAM DOWELS
4G
Surface with
HIDDEN CAMS
419440
Surface with
HIDDEN CAMS
V

BLACK 9/16" LARGE HEAD SCREW

(2 used in this step)
4I
1S
Page 17