Black 9/16" Large Head Screw - Sauder Office Port 408365 Manual De Instrucciones

Step 5
Fasten three ANGLE BRACKETS (5G) to the TOP (C). Use
å
three BLACK 9/16" LARGE HEAD SCREWS (1S).
Fasten the TOP MOLDING (J) to the TOP (C). Use three
å
BLACK 9/16" LARGE HEAD SCREWS (1S).
NOTE: There are no pre-drilled holes in the TOP
å
MOLDING. The SCREWS will tighten into the groove.
www.sauder.com/services
These holes
must be here.
5G

BLACK 9/16" LARGE HEAD SCREW

(6 used in this step)
J
C
408365
1S
These surfaces
should be even.
Page 9