Technical Specifications - Beurer IH20 Instrucciones De Uso

11. Technical Specifications

Dimensions (WHD)
Weight
Operating pressure
Atomizer filling volume
Medicine flow rate
MMAD
Sound pressure
Motor type
Power
Power wattage
Power cord length
Housing material
Accessories
Air flow
Operating conditions
Storage and transport
conditions
Classification
Protection class
Subject to technical modifications.
Symbols Key
The following symbols are used on the packaging and on the nameplate of the device and ac-
cessories.
WARNING! Read safety information to avoid serious injury.
Type BF applied part
Device in protection class 2
I On
O Off
SN Serial number
30 ON/ 30 minute operation, followed by a 30 minute break before operation continues.
30 OFF
No AP/APG Do not operate the unit in the presence of flammable gases, oxygen and aerosol
spray products.
All manuals and user guides at all-guides.com
11.6" x 7" x 3.7" (295 x 178 x 94 mm)
4 lbs (1.8 kg)
approx. 12psi (0.85 bar)
max. 6 ml
approx. 0.2 ml/min.
5 μm
max. 60 dBA (acc. to DIN EN 13544-1:2004-09 section 26)
Piston pump
120 V AC, 60 Hz
132 VA
4.92 ft. (1.5 m)
ABS / PP
atomizer, air hose, mouthpiece, nosepiece, adult mask, child
mask, filters (5pcs)
approx. 6.5 lpm
Temperature: 50°F to 104°F (+10 °C to +40 °C)
Relative humidity: 10 % to 95 %
Atmospheric pressure 700 to 1,060 hPa (hectopascal)
Temperature: -5.8°F to 158°F (-21 °C to +70 °C)
Relative humidity: 10 % to 95 %
Atmospheric pressure: 500 to 1,060 hPa (hectopascal)
Application part Type BF
Internal power supply, IPX0, no AP or APG
19