Care And Maintenance - Giordani metropolitan Instrucciones

Tabla de contenido

Publicidad

down the carry cot until you hear a "CLICK",
as shown on Fig. 28a.
29. Disassembly:
Push the button to the
right as the direction of arrow A with your
thumb,and pull up the pull-button as the
direction of arrow A simultaneously, then
lift the carry cot up to release it from the
stroller.
30. Safety Belt:
The carry cot is equipped with
safety belt inside. Press the red button as
shown on Fig. 30a, the safty buckle will be
released.
Kinder Reminder:
- Please ensure to keep the baby to face to
you when using the components, it is con-
venient for you to watch the baby's activity.
- Please try to pull up the components after
assembled stroller as the picture shown, to
ensure the both sides of components fixed
completely and would not loose.
HOW TO PLACE THE MAMA BAG
31.
As shown in Fig. 31a, putting the straps
of mama bag on the handle of the stroller,
then the mama bag will be hanged on the
stroller as shown in Fig. 31b.
HOW TO FOLD THE STROLLER
32.
Before folding the stroller, please remove the
seat first. Then press down the stroller-folding
button 1, and pull up both sides of handle si-
multaneously as the direction of arrow 2, next
fold the handle as the direction of arrow 3, the
stroller will be folded automatically as shown
on Fig. 32b.
Please note:
the folding-hook on
the left side should be locked manually, when
the folding-hook is fixed in position, the stroller
can be folded completely.

CARE AND MAINTENANCE

This vehicle requires regular check by user to make
sure moving parts remain intact. All the locking de-
vices and the second lock are engaged before use.
This product can be cleaned with damp rag and usu-
al detergents. Do not use any abrasive detergents.
The cover can be removed and washed, but should
be dry before reuse. Every fixed device should be
clipped firmly, when reinstall it.
MATERIALS
Cover:
100% polyester
Frame:
aluminum
SIZES
Open:
L: 86 cm;
H: 60 cm;
D: 107 cm.
Close:
L: 78.5 cm;
H: 60 cm;
D: 41 cm.
WARNINGS
• WARNING
Never leave your child unattended.
• WARNING
Ensure that all the locking devices
are engaged before use.
• WARNING
To avoid injury ensure that your
child is kept away when unfolding and folding
this product.
• WARNING
Do not let your child play with this
product.
• WARNING
Check that the pram body or seat
unit or car seat attachment devices are cor-
rectly engaged before use.
• WARNING
Keep away from fire.
• WARNING
The stroller complies with
EN1888:2012.
• WARNING
The stroller is not for the children
weight more than 15 KG (33LBS).
• WARNING
It is suitable for the children under
3 years old.
• WARNING
Avoid serious injury from falling or
sliding out always use the restraint system.
• WARNING
Do not put more than 3 KG in the
basket.
• WARNING
Do not carry additional children,
goods or accessories in or on this vehicle ex-
cept as recommended in the manufacturer's
instructions.
• WARNING
Put on all the brakes whenever you
park the stroller.
• WARNING
Make sure children are clear on
any moving parts if you adjust the pram/
stroller otherwise they may be injured.
• WARNING
The product is not suitable for run-
ning or skating.
• WARNING
This seat unit is not suitable for
children under 6 months. And the reclined
system of the seat is not for baby under 6
months. Push chair designed to be used from
44
birth shall use of the most reclined position
for new born babies.
• WARNING
Always use the restraint system.
• WARNING
Use a harness as soon as your
child can sit unaided.
• WARNING
No additional mattress shall be
added.
• WARNING
Parking device shall be engaged
when placing and removing the children.
• WARNING
Child may slip into leg openings
and strangle.
Never use in reclined carriage position(s) un-
less the seat used as a sleeping cot.
• WARNING
It cannot use the lowest position of
footrest when you use the stroller.
The stability of the stroller may be compro-
mised when weights are placed on the handle
or the backrest or sides of the stroller.
Do not use accessories not approved by the
manufacturer.
CARRYCOT
HOW TO ASSEMBLE THE HOOD
33.
Pull up the hood axis as the arrow shown on
Fig. 33a and clip the 2 side metal plates into it.
The metal plate is installed completely when
you hear a CLICK. Try to move it by your hands
to make sure the hood is firmly assembled
before use (see Fig. 33a/33b).Clip the decora-
tive pieces into the clip base according to Fig.
33c. The decorative clips are installed com-
pletely when you hear a CLICK. Try to move
them by your hands to make sure every clip is
firmly assembled before use. The hood is com-
pletely assembled as Fig. 33d shown.
HOW TO ASSEMBLE THE FOOT COVER
34.
As shown on Fig. 34a/34b/34c, put the foot
cover on the kit first, and then buckles the
snap button and fastens the velcros.
ADJUSTING THE HOOD
35. Unfold the hood:
unfold the hood by pulling it
forward as the arrow shown on Fig. 35a.
36. Fold the hood:
pull the hood as the arrow
shown (see Fig. 36a/36b) for storage.
ADJUSTABLE HANDLE
37. Unfold the handle:
pull the handle as the ar-
row shown, it can be adjusted by three posi-
tion. The carrying cot is firmly engaged when
you hear a CLICK (see Fig. 37a).
38. Fold the handle:
Press down buttons on both
side of the handle simultaneously, and the
adapter will be unlocked, then push the handle
as the arrow2 shown. The handle is firmly fold-
ed when you hear A CLICK (see Fig. 38a/38b).
ADJUSTABLE BACKREST
39.
Rotate the knob clock wise, the backrest can
be raised up to the highest 165 degrees. Ro-
tate the knob counter clock wise and push
downwards lightly, and then you can lay down
the backrest (see Fig. 39a/39b/39c).
ACCESSORIES
40. Preparation before use:
Install the big buckle
on the carry cot first. Fix the "hole a" to the
fixed plastic b, insert in and pull downwards
the big buckle as the arrow 2 shown (see Fig.
40a/40b) simultaneously. Repeat the opera-
tion also for the other buckle of the carry cot.
41.
Matters need attention when car seat is used
in the car, see Fig. 41a/41b.
42. Install the carry cot in the car:
carry cot in the position as Fig. 41a/41b
shown. Insert the car safety slot into the
buckle on the seat and pull out of the safe-
ty belt, see Fig. 42a/42b; make a loop with
the strap, pass the loop into the hole of the
metal car connector and slide it over the
tongue of the connector according to the ar-
row shown on Fig. 42c/42d; Tighten the seat
belt as the arrow shown (see Fig. 42e). Re-
peat the operation also for the other buckle.
Then the carry cot is firmly installed in the
car as Fig. 42f/42g shown.
43. Disassemble carry cot from the car:
cording to Fig. 43a, disassemble carry cot
from the car by pulling out the "big buckle"
as the arrow shown. The big buckles can be
fixed on the safety belt after removing the
carry cot from the vehicle (see Fig. 43b).
Kindly remind:
The carry cot can only be in-
stalled on the rear bench seat, and always lev-
el with the road. It can be installed in vehicles
equipped with 3 point static in accordance
with regulation R 6 ECE/EEG.
WARNING
44.
For the sake of safety, never put the head
of your child on the door side. When as-
45
Install the
Ac-

Publicidad

Tabla de contenido
loading

Tabla de contenido