Worx WX255 Traducción De Las Instrucciones Originales página 11

The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when the tool is switched off and when it is running
idle but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10°C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
25mm screwdriver bit
25mm pilot hole drill bit
Cartridge
Holster
Charger
Screwholder
We recommend that you purchase your accessories from the same store that sold you the tool.Refer to the accessory
packaging for further details. Store personnel can assist you and offer advice.
WX255
5
1
1
/
1
1
WX255.1
11
1
2
1
1
1
11
WX255.2
5
1
1
/
1
1