Worx WX255 Traducción De Las Instrucciones Originales página 12

Ocultar thumbs Ver también para WX255:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 45
SCREW DRIVER SAFETY WARNING
1.
Hold power tool by insulated gripping surfaces,
when performing an operation where the fastener
may contact hidden wiring. Fasteners contacting a
"live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
SAFETY WARNINGS FOR BATTERY CELLS INSIDE THE
TOOL
a)
Do not dismantle, open or shred cells.
b)
Do not short-circuit charging terminal. Do not
store power tool haphazardly in a box or drawer
where charging terminal may short-circuit
each other or be short-circuited by conductive
materials. When power tool is not in use, keep it away
12
from other metal objects, like paper clips, coins, keys,
nails, screws or other small metal objects, that can make
a connection from one charging terminal to another.
c)
Do not expose power tool to heat or fire. Avoid
storage in direct sunlight.
d)
Do not subject power tool to mechanical shock.
e)
In the event of battery leaking, do not allow the
liquid to come into contact with the skin or eyes.
If contact has been made, wash the affected area
with copious amounts of water and seek medical
advice.
f)
Seek medical advice immediately if a cell has been
swallowed.
g)
Keep power tool clean and dry.
h)
Wipe the charging terminals with a clean dry cloth
if they become dirty.
i)
Power tool needs to be charged before use.
Always refer to this instruction and use the
correct charging procedure.
j)
Do not maintain power tool on charge when not in
use.
k)
After extended periods of storage, it may be
necessary to charge and discharge the power tool
several times to obtain maximum performance.
l)
Battery gives its best performance when it is
operated at normal room temperature
(20°C ± 5°C).
m) When disposing of cells, keep cells of different
electrochemical systems separate from each other.
n)
Recharge only with the charger specified by
WORX. Do not use any charger other than that
specifically provided for use with the equipment.
A charger that is suitable for one type of battery may
create a risk of fire when used with another battery.
o)
Keep power tool out of the reach of children.
p)
Retain the original product literature for future
reference.
q)
Dispose of properly.
GENERAL SAFETY WARNINGS FOR YOUR BATTERY
CHARGER
WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or serious
injury.
Save all warnings and instructions for future reference.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Wx255.1Wx255.2

Tabla de contenido