Setting Date And Time - Duronic BPM120 Manual De Instrucciones

Setting Date and Time

It is important to set the clock before using your blood pressure monitor, so that a
time stamp can be assigned to each record that is stored in the memory.
(year: 2018—2058 time:24H/12 H)
1. When the monitor is off, press the "SET" button
and hold for 3 seconds to enter the mode for year
setting.
2. Press the "MEM" repeatedly to change the
[YEAR].
3. When you get the correct year, press "SET" to
save and it will turn to next step automatically.
4. Next, repeat steps 2 and 3 to set the [MONTH]
and [DAY].
12