Delete The Records - Duronic BPM120 Manual De Instrucciones

If you did not get the correct measurement, you can delete either single records
individually, or delete the whole set of records altogether.
A: To delete one individual record:
1. Press the "MEM" button
once to enter Memory
Recall Mode. Press the
"SET" button to find the
record you wish to delete.
B: To delete all of the records:
1. Press the "MEM"
button once to enter
Memory Recall Mode.
The above screen will
show.
Note: To exit out the delete
mode press "Start/Stop" button
shortly.

Delete the Records

2. Press and hold
down the "SET" button
until the screen above
shows, with the words
"del" and "one".
2. Press the "MEM"
and hold down until
the above screen
shows, with the words
"del" and "all".
START
STOP
3. Press and hold
down the "START/
STOP" button until the
screen above shows,
with the words "del"
and "done".
18
3. Press and hold down
the "START/ STOP"
button until the screen
above shows, with the
words "del" and "done".
4. When there is no
record, the screen
display above will
show on the monitor.