Managing The Records; Recall The Records - Duronic BPM120 Manual De Instrucciones

1. When the monitor is off, press the "MEM" button to show the most
recent record.
2. Press the "MEM" or "SET"
buttons to move through the
historic records to find the
record you want.
The record will be shown in this order: first showing the record number, followed by
the date and then the time.
The current No. is No. 1
three records in total.
Caution: The most recent record (1) is shown first. Each new
measurement is assigned to the first (1) record. All other records
are pushed back one digit (e.g., 2 becomes 3, and so on), and the
last record (60) is dropped from the list.

Recall the Records

UP
MEM
The corresponding
date is 2019 year
July 1st.
17
MEM
DOWN
SET
The corresponding
time is 10:38.