Tabla de contenido
Publicidad
using the smart tweezers
1
Clean your eyebrows with skin tonic or alcohol to prevent
eyebrow hair from slipping away between the tweezer arms.
2
Use a warm face cloth to soften the skin before tweezing. This
makes hair removal easier.
3
Brush your eyebrows in the direction of hair growth.
4
Use an eye pencil to mark the desired shape of your eyebrows.
Remove any hairs outside the marked shape.
5
Switch on the light by pressing the on/off button once.
6
Always pull out the hair in the direction of hair growth.
Note: Pull out the hairs one by one.
Do not use the Smart Tweezers to remove hairs that grow out of
moles.
Do not point the light of the Smart Tweezers directly at your or
somebody else's eyes.
replacing the batteries
1
Open the battery and light compartment by turning the bottom
anticlockwise with a coin (Fig. 15).
2
Remove the old button batteries.
Keep the button batteries out of the reach of children and pets. Button
batteries present a potential choking hazard.
3
Insert the new button batteries with the negative side pointing
forward into the battery and light compartment (Fig. 16).
Note: The Smart Tweezers work on three alkaline button batteries type
L736H or AG3 (dia. 7.8 x 3.4mm).
4
Screw the bottom back onto the battery and light compartment by
turning it clockwise with a coin (Fig. 17).
4203.000.6725.1.indd 13
All manuals and user guides at all-guides.com
EnglisH
13
01-09-10 08:33
Publicidad
Tabla de contenido
