Troubleshooting - 3M PELTOR ComTac V Manual Del Usuario

TROUBLESHOOTING

Problem
Headset will not
power on
I can hear radio
communications
but cannot
transmit
Rendered on 1/23/2020 10:54:14 AM
Possible Causes
Drained batteries
Battery improperly
installed
Poor headset and PTT
connection
communications
(comms)microphone
(A:6)
Page 19
Suggestion
Replace batteries
Check polarity
Ensure the headset plug is fully seated by
rotating 180°
If a "known good" PTT is available, swap with
the problem PTT. If problem is solved, replace
the problem PTT.
Check the comms microphone connection
on the backside of the earcup. If problem
persists, replace comms microphone with
a "known good" microphone. If problem is
solved, replace comms microphone.
Have headset model, PTT model and radio
model available.
19
34-8725-1903-7 ComTac V manual.pdf