Operational Measures When Using The Unit - Waeco AirCon Service Center ASC5100G Instrucciones De Uso

ASC5100G
A
NOTICE!
 Make sure that refrigerant is not able to escape and leak into the envi-
ronment during operation, when filling or draining refrigerant or during
repair and service work.
This will protect the environment.
It also avoids the difficulty or impossibility of detecting leaks in the
vehicle or in the unit due to the presence of refrigerant in the vicinity
of the AirConServiceCenter.
 Take suitable precautions to ensure that leaking refrigerant is not able
to get into the drainage system.
I
NOTE
 Special information on refrigerant R-1234yf and safety measures as
well as the protection of personnel and objects, including fire protec-
tion, can be found in the safety sheets of the refrigerant manufacturer.
2.4

Operational measures when using the unit

The operator must provide operating instructions according to TRG 402
for each filling system (AirConServiceCenter). These operating instruc-
tions must be used to train personnel in handling the unit.
The operator must ensure that personnel are instructed in the following
points at least once a year:
 Special dangers when dealing with compressed gases
 Safety guidelines when dealing with compressed gases
 Health precautions when dealing with compressed gases
 Operating the unit and performing service work on the unit
The operator must ensure that personnel appointed to perform service
and repair work as well as leak inspections are certified to deal with
refrigerant and filling systems.
Certification and knowledge of the applicable guidelines and standards
can be acquired from a training course at a chamber of trade, chamber of
industry and commerce or at any other recognised training facility.
The system operator must ensure that all service hoses are laid in such
a way that they cannot be damaged when the unit is used.
EN
All manuals and user guides at all-guides.com
Safety
61