Air Conditioning System Test Without Refrigerant Service - Waeco AirCon Service Center ASC5100G Instrucciones De Uso

Estacion de mantenimiento de aire acondicionado
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

ASC5100G
8.6
Air conditioning system test without refrigerant
service
I
NOTE
The air conditioning can only be tested on vehicles with a low pressure
port and a high pressure port, or with a low pressure port only.
If you only test the function of a vehicle air conditioning system without
drawing off and recycling the refrigerant, the vehicle air conditioning sys-
tem would lack the refrigerant remaining in the service hoses of the air
conditioning unit after the test. The "A/C system test" menu item has
been added to compensate for this loss.
I
NOTE
The existing standard function processes "Short selection" and "Free
selection" already have a compensation function for service hoses,
which means the final air conditioning function test can be carried out in
the usual manner (the service hoses are drained by the unit).
1. First, fit the connections of the AirConServiceCenter to the vehicle
air conditioning system and open them.
2. Start the vehicle's engine and switch on the air conditioning system.
3. Press the cursor key  or  to access the basic menu.
4. In the basic menu, use the cursor keys  or  to select
"Other selections":
5. Press ENTER to confirm.
6. Use the cursor keys  or  to select "A/C system test":
✓ A prompt appears asking you to check the air conditioning system:
7. Check the high and low pressure of the air conditioning system in
accordance with the manufacturer's specifications.
EN
All manuals and user guides at all-guides.com
Short selection
Free selection
Other selections
ENTER-OK
A/C system test
Service.
ENTER-OK STOP-EXIT
Check the A/C system
STOP-EXIT
Operation
85

Publicidad

Tabla de contenido
loading

Tabla de contenido