TOUGHBUILT TB-H2-LL-30-L2 Instrucciones De Funcionamiento página 15

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Position and secure the Cross Level Laser on a leveled tripod, pedestal or the
8
. (DO NOT overtighten the mounting screw).
Dovetail Slide Mount
WARNING! Do not position the tool at eye level.
2
With the Pendulum Switch
in the Locked position, Push the ON button to
activate the laser. Adjust the height of the tool to the vicinity of your required
height. Slide the Pendulum-lock Switch
2
towards the front of the tool. The
laser beam will be activated and may fluctuate at first. Allow time for the self-
leveling system to stabilize within its self-leveling range of ±3.5° degrees.
When the laser beam stops fluctuating, the system is ready for use.
15

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido