Set-Up And Assembly - TOUGHBUILT TB-H2-LL-30-L2 Instrucciones De Funcionamiento

To set up the tool:
• Inspect the box for damage.
• Remove the contents of the box and lay everything on a flat, clean and dry
surface. Check the contents against the packaging list and familiarize
yourself with their names.
• Write the requested information on the Registration Form found at the end of
the manual. Keep this information at a safe location. When contacting
ToughBuilt Industries, Inc. for assistance or for possible warranty
®
claims, the information on the registration form will be required.
• Keep the box for storing the tool.
• Read, study and familiarize yourself with all aspects of this manual before
attempting to power the tool on.
• The work area should be clear of obstructions.
• Floor surface where the Cross-Level Laser is to be placed be hard,
level and stable.
• A tripod, a pole or any other tool, onto which this Cross-Level Laser is
mounted should be able to support the tool's weight safely.
• When using a tripod, the legs should be placed on a hard/solid surface to
prevent shifting or sinking. Make sure to extend and lock all legs, and
secure the tool to the mounting hardware. DO NOT over-tighten
the mounting screw.
DO NOT USE IF DAMAGED.
•

SET-UP AND ASSEMBLY

4.
11