Cleaning; Maintenance - TOUGHBUILT TB-H2-LL-30-L2 Instrucciones De Funcionamiento

CLEANING

6.
Before and after each use, thoroughly inspect the tool for any damage.
IMPORTANT! DO NOT use a damaged tool.
After completion of each work cycle, or at the end of the day, slide the
Pendulum Switch
If the tool is soiled, wipe with a damp cloth. DO NOT USE CHEMICALS. Laser
reflectors should be wiped with a lint-free cloth only. DO NOT USE PAPER TOWEL.

MAINTENANCE

7.
DO NOT allow the tool to the tool get wet. Damage to internal circuits
•
may result.
• DO NOT allow this tool to get wet. This tool is not waterproof.
DO NOT leave tool in direct sunlight or expose it to high temperatures.
•
The housing and some internal parts are polymeric materials and may
become deformed at high temperatures.
DO NOT store the tool in a cold environment. Moisture may form on
•
interior parts when warming up. This moisture could fog up laser
windows and/or cause corrosion of internal circuit boards.
NOTE: When working in dusty locations, some dirt may collect on the laser
window. Remove moisture or dirt with a soft, dry cloth. DO NOT use paper towel.
• DO NOT use aggressive cleaning agents or solvents.
20
2
to its LOCKED position.